CHARACTERIZATION AND ENERGY POTENTIAL OF THE PRUNE IN THE MUNICIPALITY OF UBERLÂNDIA-MG ABSTRACT
DOI:
https://doi.org/10.52138/sitec.v11i1.127Keywords:
Sustentabilidade, Matriz energética, Resíduos de arvoresAbstract
Sustainability has led countries to seek alternatives and models that improve the quality of life, as well as guarantee this quality for future generations. Based on these principles, the search for energy alternatives has grown over the years, numerous researches have been carried out to take advantage of any and all material for obtaining energy and other products, since this need, this work aimed to characterize the biomass from pruning carried out in Uberlandia, for this, samples of freshly crushed branches and grasses were collected and dried and the following analyzes were carried out: Moisture, hemicellulose, extractive lignin, calorific power and elementary analysis. Soon it was possible to identify through these analyzes that the biomass from pruning does have an energy potential, being able to contribute to the availability of energy for the municipality, besides contributing for a sustainable development.
References
ASTM E 711-87 (Reapproved 1992): Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel By the bomb calorimeter. ASTM International, West Conshohocken, PA, 1992. BROWING, B.L., 1967. Methods of Wood Chemistry, 1st ed. Interscience Publishers, New York.
CASTRO, D.O.; FROLLINI, E.; MARINI, J.; RUVOLO-FILHO, A. Preparação e caracterização de biocompósitos baseados em fibra de Curauá, biopolietileno de alta densidade (BPEAD) e polibutadieno líquido hidroxilado (PBHL). Polímeros, v.23, p.65-73, 2013.
DD CEN/TS 15104:2005, Solid biofuels – Determination of total content of carbon, hydrogen and nitrogen – Instrumental methods.
FARIAS, F. O. M. Caracterização de biomassas brasileiras para fins de aproveitamento energético Dissertação de Mestrado - Universidade Estadual de Campinas, Faculdade de Engenharia Química - Campinas, SP, 2012.
HATFIELD, R.; FUKUSHIMA, R. S.; Can lignin be accurately measured? Crop Science, v.45, p.832-839, 2005.
IBGE - https://www.ibge.gov.br/cidades-e-estados/mg/uberlandia.html acesso em 10 de outubro de 2020
MAZZONETTO, A. W; VISSOTTO, J. P; NEVES, R. C; SÁNCHEZ, E. M. S; SÁNCHEZ, C. C. Caracterização de resíduos de poda, capina e serragem urbana para geração de energia. CONEM, Congresso Nacional de Engenharia Mecânica 2012. São Luís 2012.
MILLER E TILLMAN, B. G. and Tillman, D. A. Combustion Engineering Issues for Solid Fuels, San Diego, United States of America, 2008.
TAPPI - Technical Association Of The Pulp and Paper Industry. TAPPI test methods T264 om-88: "preparation of wood for chemical analysis". Atlanta: Tappi Technology Park, 1996, v.1.
TAPPI - Technical Association Of The Pulp and Paper Industry. TAPPI test methods. T 203 cm-99. Alpha-, beta- and gamma-cellulose in pub. Atlanta: Tappi Technology Park, 1999, v.1.
TAPPI - Technical Association Of The Pulp and Paper Industry. TAPPI test methods T204 cm-97: "Solvent extractives of wood and pulp". Atlanta: Tappi Technology Park, 2007, v.1.
TAPPI - Technical Association Of The Pulp and Paper Industry. TAPPI test methods T T211 om-02: "Ash in wood, pulp, paper and paperboard". Atlanta: Tappi Technology Park, 2002, v.1.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Ciência & Tecnologia
This work is licensed under a Creative Commons Attribution 4.0 International License.
